To invent, you need a good imagination and a pile of junk. Thomas A. Edison
Teebot-3D was designed and developed to build your knowledge of 3D printing!!
- Max Print size: 10cm x 10cm 10cm.
- Nozzle size: 0.4mm
- Print Material: PLA
- Print Quality: 100 - 300 microns
- Connectivity: SD Card, USB
- File input: STL, OBJ
- Slicing Software: Cura, Sli3r
- Heat Bed: No
Share your improvements, comments and designs via the online Forum.
Understand the principles of 3D printing and apply it to other projects and builds. Make repairs, fixes and improvements on your 3D printer.
TeeBot-3D will enable you to create and make prototypes and functional Items, you are also able to make market ready products and items.
TeeBot-3D is a great Tool and project for schools to encourage and promote creative thinking in students.
TeeBot-3D empowers a Fablab/Maker-space with a tool that is mostly required and used by makers / hobbyist.
The 3D printer is made up of the following main commponents.
32mm diameter PVC pipe : Approximately 1.6 meter (63 Inches), 90 degree pipe fittings - 4 pcs and T Joint - 2 pcs. Dimension, cut instructions and details are found in build manual.
All Printed parts are designed to be printed with PLA, no support. These can be printed yourself, or ordered online.
Stepper motors, linear bearings, Timing belts and the control board makes up the mechanical and electronics parts required.
You will need a few bolts and nuts to assemble everything together, see the build instruction for the detail list and sizes of the required fasteners.
Frame assembly Animation (Demos).
Get free support building you Teebot-3D!!
Join the online forum an post your questions and request.
Every student or builder is welcomed to the forum. A place to learn more about projects and products. This is a great place for discussion, and answers to common questions.
Get your Original "Teebot-3D" parts, complete kits and components, Are you interested in bulk buy of the Original Teebot-3D kits? Fill the contact form below.
Frequently Asked Questions
For other questions feel free to send an email.
What is the size and lenght of PVC pipe and fittings ?
You need approximately 1.6 meters of the 32mm pipe, with 4pcs of the corner fitting, and 2pcs of the T joint fittings. These you can find in most hardware store at the plumbing section. If you are nice to them they might cut is to exact lenght for you.
How can I get all the parts and components ?
The documentation contains detail part list and Item description, you can source the individual parts and order them online 3dstores, alibaba, ebay, amazon ..etc
Get complete original kits and components directly from .. --3DstuffsNL - (Eindhoven, Netherlands) --COLAB - (Kaduna, Nigeria)
The following are co-working space, innovation hub and open workshop where you can get free help in building your Teebot 3D:
--COLAB - (Kaduna, Nigeria) --BABY Lab - (Abijdan, Côte d'Ivoire) --OUAGALAB - (Ouagadougou, Burkina Faso)
Send me an email if you are..
Interested in customised 3D printers, trainings and products, Or you are a resseller who likes to stock and re-sell complete genuine Teebot-3d parts and 3D printers.
Can I make the Tebot-3D bigger?
Yes you can, however if this is your first 3D printer, I encourage to build the small Teebot-3D first !! and use it to make parts for your second bigger printer. Please note the firmware/Software needs to change. Join the forum with your project and you will get helped.
What softwares do I need, and are they free?
You will need a slicing software that will convert your 3D model or design from stl into machine language (Gcode). In the manual it is explained how you can do this using CURA which is a free opensource software.
The Pipe Team
TeeBot-3D was brought to you thanks to countless coffee cups, dozens of failed prototypes and buckets of inspiration from the openSource community.
Emmanuel AdetutuOracle of Inspiration
Babalola SamuelOracle of Concept
I hope that Teebot 3D, has inspired you to get started into the exciting world of 3D printing.
Want to get in touch? Fill the form.
When not tinkering/making stuffs we will get back to you.